Newsletter: 10% off

Coastal Sunset Sticker for Your Hobby Camper

4.7 (2528 store reviews)
Camper van decals: Landscape set sea and beach with sunset
-15%
1 / 3
Camper van decals: Landscape set sea and beach with sunset
Camper van decals: Landscape set sea and beach with sunset
2 / 3
Camper van decals: Landscape set sea and beach with sunset
3 / 3
Simulated surface color *The vinyl does not include the background colour
Background adjusted to improve vinyl visibility.

Sizes: width × height. Measure the area of your vehicle where it will go first.

€17.45 €20.53 -15%
You save €3.08
VAT included · Ref. woh221
Buy it today before 7:00 and receive it on Monday 9 November

    We recommend other items that you may be interested

    Your motorhome, your road, your identity

    Printed vinyls designed to live on the road. High-resistance UV ink, protective varnish and adhesion tested on the motorway: bring your motorhome's character to every sunrise, with no bodywork and no paint shop.

    • Withstand 4-5 years of European sun, rain and snow without fading
    • Survive automatic car wash with brushes and gentle jets after the first week
    • Adhesion designed for fibreglass, ABS, aluminium and gel coat
    • Come off without damaging paint when you change motorhomes or sell yours
    • Wet application: no bubbles, no rush, at home or on the campsite
    • Made in Spain with Roland plotters and pro UV varnish

    Why this vinyl can take life on the road

    We've been printing for customers who take their designs outdoors for over 20 years. These are the four technical reasons your motorhome vinyl lasts as long as it does.

    Roland Eco-SOL MAX ink

    Manufacturer claim: 3 years outdoors unlaminated. We add UV varnish on top and push that to 4-5 years under direct sun.

    UV-protective varnish

    An extra transparent layer that shields the ink from UV rays, automatic wash brushes and the micro-scratches from road dust.

    Adhesive built for your motorhome

    Calendered monomeric vinyl with strong initial grip but removable when heated. It hugs the soft curves of side panels, hood and rear door without lifting through temperature swings.

    We print every vinyl in Huesca

    From order to production in under 24 hours. Banner Imagen's own team prints it, we don't outsource. If anything goes wrong, we know exactly where and why.

    Put your motorhome's name, your coordinates or a road quote on it

    Has your motorhome got a name? Want to wear your favourite coordinates on the rear door? Pick the typography and colour, and we print it to your exact size.

    Create my motorhome text →

    Where can you stick it?

    Surfaces that work on your motorhome

    • Smooth side panels (fibreglass, ABS, GRP)
    • Rear door, hood and metal wings
    • Smooth aluminium and polished gel coat
    • Exterior doors and lockers with intact paint
    • Windows and skylights with no inside condensation
    • ABS plastic on spoilers, fins and rigid trim

    Surfaces to avoid

    • EPDM door and rear hatch seals (they move when closing)
    • Awnings, roll-out canopies and outdoor fabrics
    • Rusted, peeling or cracked paint surfaces
    • Areas with fresh wax or recent water-repellent treatment
    • Flexible acrylic that bends in the wind (some deflectors)

    If your surface has rust or loose paint, sand and prime before applying the vinyl. On wax or aggressive treatments, wait 30 days or degrease with isopropyl alcohol.

    What's in your order?

    This is what arrives at your home with the sticker, every detail taken care of. Application is easy with the included transfer film — you'll need a few basic tools you probably already have at home.

    Included in the box

    1

    Your design printed with UV varnish

    White monomeric calendered vinyl printed with Roland Eco-SOL MAX ink and sealed with a UV varnish layer. Cut to shape or as a rectangular panel depending on the design.

    2

    Transfer film

    Transparent, holds the design together during application.

    3

    Silicone backing paper

    White backing that protects the adhesive. Discarded during installation.

    4
    Free

    Practice decals

    Small extra decals so you can practise the technique before the final one. In case you have any doubts.

    5

    Printed instructions

    Step-by-step guide in your language.

    6

    Exclusive packaging

    Designed by TeleAdhesivo, not generic. For larger decals, rigid cardboard tube with original plastic caps that protect the vinyl during transport.

    You'll also need

    These tools are not included. You probably have some at home. The squeegee is the most important: without it, bubbles are almost guaranteed. If you don't have one, you can add it when finalising your order.

    Squeegee

    Smooths the decal and prevents bubbles.

    Masking tape

    Holds the decal in place before sticking it.

    Cutter knife

    For fine cuts during application.

    Practise first with the test decals. It's easier than it looks.

    How to install

    The technique varies depending on the size of your decal. Choose the case that matches your order.

    What size is your decal?

    How would you like to view the instructions?

    Download instructions in PDF Take it on your phone while you install.
    1. 1
      Position the decal and hold it with masking tape on the surface.
    2. 2
      Peel the decal off the white paper. If any part stays on the paper, rub with the squeegee until it transfers to the transparent film.
    3. 3
      Press with the squeegee from the centre outwards. Avoid bubbles.
    4. 4
      Rub the entire surface well with the squeegee so the decal sticks.
    5. 5
      Remove the transparent film slowly. Check that no element has stayed stuck to it.
    6. 6
      Done. Enjoy it!

    How would you like to view the instructions?

    Download instructions in PDF Take it on your phone while you install.
    1. 1
      Position the decal and tape it with masking tape. Place a horizontal strip in the centre that will act as a hinge.
    2. 2
      Remove the top tape and peel off the silicone backing of the upper half carefully.
    3. 3
      Cut the white backing across the centre. This way you can apply the upper half while the lower one stays protected.
    4. 4
      Press with the squeegee from the centre to the edges on the upper half.
    5. 5
      Remove the remaining white backing from the lower half.
    6. 6
      Press with the squeegee from the centre to the edges on the lower half.
    7. 7
      Remove the transparent film at 180°, not perpendicular. Slowly.
    8. 8
      Done. Enjoy it!

    Before you start

    • Apply indoors or in the shade. Motorhome paint above 30 °C triggers the adhesive and leaves bubbles you can't get out.
    • After applying, let it cure for 48 hours under cover before hitting the road, and 7 days before the first car wash.
    • When applying on a sharp curve (rear-door corner, bumper edge), warm gently with a hairdryer at 15 cm and shape slowly.
    • Wet application: if you're unsure about positioning, spray the surface with soapy water before removing the silicone backing. You'll have 60 seconds to slide and centre before it sets.

    Cleaning, durability and removal

    How to clean it

    Lukewarm water, neutral car shampoo and a soft sponge or microfibre. Avoid solvents, industrial alcohol and aggressive polishes. Garden hose is fine; pressure washer only beyond 40 cm and never aimed directly at the vinyl edge.

    How long it lasts

    UV varnish gives you 4-5 years under continuous outdoor European sun (coast, mountain, motorway). In sheltered areas (panel under an awning, garage side) practically unlimited. If you go through a brush car wash every week, expect 2-3 years.

    How to remove it

    Heat with a hairdryer or low-power hot air at 15 cm. Pull off at a 45° angle, slow and steady. If any adhesive residue remains, citrus cleaner (natural degreaser type) and a soft cloth will lift it. Never use a metal scraper on the paint.

    Shipping and returns

    Shipping

    Receive it in 5-7 days in UK and Ireland. Manufactured and shipped from Spain.

    Free shipping from €60 (check conditions per country).

    View full shipping times and costs →

    Returns

    Returns within 30 days on non-personalised products.

    If you've ordered a custom size or personalised text, we don't accept returns except for manufacturing defects.

    If your product arrives defective, we'll replace it free of charge.

    Frequently asked questions

    Can it be cleaned?
    Yes, with a soft cloth and water with neutral soap. Avoid solvents and aggressive glass cleaners.
    How long does delivery take?
    5-7 days in UK and Ireland. 3-7 days in the rest of Europe depending on country. You'll receive an email with tracking when shipped.
    Does it survive a brush car wash?
    Yes, once cured (minimum 7 days after applying). The UV varnish protects against brushes, but bear in mind that a weekly aggressive brush wash will shorten the useful life from 4-5 years to 2-3 years. If you wash with a hose or a gentle jet beyond 40 cm, durability reaches its maximum.
    Will it hold up at 130 km/h with rain and wind?
    Yes. The adhesive was designed for vehicle exterior parts (tested on cars, motorbikes and motorhomes). The leading vinyl edge is the one most exposed to wind — that's why we recommend applying the narrowest side facing forward into the airflow. After 48 hours of curing indoors, you can hit the road without issue.
    Does it affect the MOT or insurance?
    Decorative vinyl doesn't affect the MOT as long as it doesn't cover the licence plate, headlights, mirrors or indicators. Your fully comprehensive insurance covers the bodywork, not the vinyl; if you need to repair a dent, peel off the vinyl in that area first (it's removable) or ask for an extra estimate. In most countries there's no requirement to notify aesthetic changes to your insurer as long as it isn't commercial advertising.
    Can I apply it over the manufacturer's original lettering?
    Yes, as long as that adhesive is in good condition (not lifting). The new vinyl sticks to your motorhome's surface just like paint. If the original lettering is cracked or peeling, remove it first and clean the area with isopropyl alcohol.
    And when I sell the motorhome, will it come off without damaging the paint?
    Yes, that's one of this vinyl's strong points. Warm the area with a hairdryer, peel off at a 45° angle slowly and, if any adhesive residue remains, citrus cleaner lifts it without attacking the paint. The surface ends up as it was, with the bonus that the vinyl area has been protected from the sun all that time.

    Customer reviews

    No reviews yet for this product. Be the first to share your experience after purchase!

    Guarantee and commitment

    Original Roland Eco-SOL MAX inks
    UV varnish protector applied after printing
    REACH-certified vinyl · GREENGUARD-certified inks
    Up to 4-5 years outdoors with moderate sun
    Made in Spain since 2000
    100% secure payment
    More information about your data
    Based on the purchase contract concluded between the user and Banner Imagen S.L. (Muraldecal.com), the data provided by the user through this form will be incorporated into databases for which Banner Imagen S.L., with VAT number ESB22348015 and headquarters at Polígono Monzú, Ronda Industria, C/Interior Nave 13, 22006 HUESCA (Spain), is fully and exclusively responsible. The purpose of collecting data on this form is to facilitate the processing of orders, user profiling, and the sending of commercial offers by email (2 to 3 monthly shipments) about products and/or services that may be of interest to our customers. Banner Imagen S.L. commits not to make data transfers or international transfers, except in cases of legal obligation. You have the right of access, rectification and deletion, as well as other rights, as indicated in the privacy policy, at the email info@muraldecal.com.