15% OFF on orders over €50 | Code: HOME15

Sticker Cookie Monster

4.7 (128 reviews from the category)
Car & Motorbike Stickers: Cookie Monster
-15%
1 / 4
Car & Motorbike Stickers: Cookie Monster
Car & Motorbike Stickers: Cookie Monster
2 / 4
Car & Motorbike Stickers: Cookie Monster
3 / 4
Car & Motorbike Stickers: Cookie Monster
4 / 4
Simulated surface color *The vinyl does not include the background colour
Background adjusted to improve vinyl visibility.
€1.75 €2.06 -15%
You save €0.31
VAT included · Ref. asfs262
Buy it NOW and receive it on Thursday 5 November

    Categories for this product

    We recommend other items that you may be interested

    Professional printed stickers with Roland inks

    Stickers printed with Roland Eco-SOL MAX inks on premium white vinyl and sealed with a protective UV varnish that makes them resistant to sun, rain and pressure washing. Cut to the design contour, no white background. Ready to apply with the included transfer film — they also accept the wet application technique with neutral soap for easier installation.

    • Roland Eco-SOL MAX inks · vivid and long-lasting colours
    • Protective UV varnish · resists sun, water and abrasion
    • Up to 4-5 years outdoors with moderate sun
    • Dry application or wet with neutral soap
    • Cut to the design contour, no white background
    • Made in-house in Spain since 2000

    Why these stickers are different

    Not home printing nor dropshipping from Asia. Each sticker goes through a professional process with certified materials — the difference shows and grows over time.

    Original Roland Eco-SOL MAX inks

    Eco-SOL MAX is the reference ink for professional printing: intense colours, water and UV resistant. GREENGUARD certified (low VOC emissions) and REACH compliant. Colour stays vivid for years under the sun while cheap inks turn yellow.

    UV varnish applied after printing

    We add a professional UV coating over each print that cures instantly forming a hard layer. Protects from sun, rain and conventional cleaners. The Roland ink alone lasts 3 years outdoors — with our varnish, several years more.

    Premium white calendered vinyl

    Quality substrate with permanent but heat-removable adhesive. Sticks firmly on smooth surfaces and removes without damaging vehicle paint. Monomeric calendered vinyl, ideal for flat or gently curved surfaces.

    Made in-house in Spain since 2000

    Every order goes through quality control before leaving the workshop. No dropshipping, no distant imports. Fast delivery in 24-72h and direct support if you have questions — something Asian marketplaces can't offer.

    Pair it with your name or quote in vinyl

    Add a custom text in cut vinyl: surname, quote, race number or club name. Over 100 typographies and 30 colours in matt and gloss. Perfect combination with your printed sticker.

    Create my vinyl text →

    Where can you stick it?

    Suitable surfaces

    • Smooth walls (matt or satin paint)
    • Glass and mirrors
    • Smooth tiles
    • Varnished furniture
    • Car, motorbike and vehicle bodywork
    • Appliances with smooth surfaces

    Unsuitable surfaces

    • Textured walls or marked relief
    • Paint applied less than 2 weeks ago
    • Surfaces with active humidity
    • Fabrics and porous surfaces
    • Untreated plastics (PE, PP)

    Before applying, make sure the surface is clean, dry and free of dust and grease.

    What's in your order?

    This is what arrives at your home with the sticker, every detail taken care of. Application is easy with the included transfer film — you'll need a few basic tools you probably already have at home.

    Included in the box

    1

    Printed and varnished sticker

    Your design printed with Roland Eco-SOL MAX inks on premium white vinyl, sealed with UV varnish and cut to the contour.

    2

    Transfer film

    Transparent, holds the design together during application.

    3

    Silicone backing paper

    White backing that protects the adhesive. Discarded during installation.

    4
    Free

    Practice decals

    Small extra decals so you can practise the technique before the final one. In case you have any doubts.

    5

    Printed instructions

    Step-by-step guide in your language.

    6

    Exclusive packaging

    Designed by TeleAdhesivo, not generic. For larger decals, rigid cardboard tube with original plastic caps that protect the vinyl during transport.

    You'll also need

    These tools are not included. You probably have some at home. The squeegee is the most important: without it, bubbles are almost guaranteed. If you don't have one, you can add it when finalising your order.

    Squeegee

    Smooths the decal and prevents bubbles.

    Masking tape

    Holds the decal in place before sticking it.

    Cutter knife

    For fine cuts during application.

    Practise first with the test decals. It's easier than it looks.

    How to install

    The technique varies depending on the size of your decal. Choose the case that matches your order.

    What size is your decal?

    How would you like to view the instructions?

    Download instructions in PDF Take it on your phone while you install.
    1. 1
      Position the decal and hold it with masking tape on the surface.
    2. 2
      Peel the decal off the white paper. If any part stays on the paper, rub with the squeegee until it transfers to the transparent film.
    3. 3
      Press with the squeegee from the centre outwards. Avoid bubbles.
    4. 4
      Rub the entire surface well with the squeegee so the decal sticks.
    5. 5
      Remove the transparent film slowly. Check that no element has stayed stuck to it.
    6. 6
      Done. Enjoy it!

    How would you like to view the instructions?

    Download instructions in PDF Take it on your phone while you install.
    1. 1
      Position the decal and tape it with masking tape. Place a horizontal strip in the centre that will act as a hinge.
    2. 2
      Remove the top tape and peel off the silicone backing of the upper half carefully.
    3. 3
      Cut the white backing across the centre. This way you can apply the upper half while the lower one stays protected.
    4. 4
      Press with the squeegee from the centre to the edges on the upper half.
    5. 5
      Remove the remaining white backing from the lower half.
    6. 6
      Press with the squeegee from the centre to the edges on the lower half.
    7. 7
      Remove the transparent film at 180°, not perpendicular. Slowly.
    8. 8
      Done. Enjoy it!

    Before you start

    • The decal is not reusable. Once peeled off, it cannot be repositioned.
    • If two adhesive sides touch each other while handling, the decal becomes unusable.
    • If the wall has been painted less than 2 weeks ago, wait for full curing.
    • Wet application (optional): spray the surface with soapy water before sticking — makes repositioning easier and removes bubbles. Works because the UV varnish protects the ink from contact with soapy water.

    Cleaning, durability and removal

    How to clean it

    Soft cloth with warm water and neutral soap. Avoid products based on alcohol, petrol, solvents or abrasive cleaners — they can damage the protective varnish over time. For regular cleaning, soapy water is enough.

    How long it lasts

    Up to 4-5 years outdoors with UV varnish under moderate sun exposure (3 years base certified by Roland Eco-SOL MAX, extended by our UV varnish). Indoors, without direct sun, colour stays virtually indefinitely. REACH-certified vinyl and GREENGUARD-certified inks.

    How to remove it

    Apply moderate heat with a hairdryer at low power, lift a corner and pull slowly. If any adhesive residue remains, clean it with alcohol or mild glass cleaner on a cloth. On cured paint (over 2 weeks) in good condition, they usually come off without visible marks.

    Shipping and returns

    Shipping

    Receive it in 5-7 days in UK and Ireland. Manufactured and shipped from Spain.

    Free shipping from €60 (check conditions per country).

    View full shipping times and costs →

    Returns

    Returns within 30 days on non-personalised products.

    If you've ordered a custom size or personalised text, we don't accept returns except for manufacturing defects.

    If your product arrives defective, we'll replace it free of charge.

    Frequently asked questions

    What surfaces can it be applied to?
    On smooth, clean and dry surfaces: smooth walls, glass, varnished furniture, tiles, well-painted metal and vehicle bodywork.
    Does it work on textured walls?
    Not recommended. The relief prevents uniform adhesion and reduces durability. If your wall has fine texture, test first on a small area.
    How long should I wait after painting the wall?
    At least 2 weeks. Uncured paint can come off when removing the decal.
    Does it damage the wall when removed?
    Under normal conditions on cured paint, it usually comes off without damage by applying gentle heat and peeling slowly. On recent or low-quality paint it may lift the paint.
    Can it be cleaned?
    Yes, with a soft cloth and water with neutral soap. Avoid solvents and aggressive glass cleaners.
    What's included in the order?
    Cut decal, transfer film, silicone backing, practice decals so you can practise first, and printed instructions. Squeegee, masking tape and cutter are not included — they are basic tools you probably have at home, and if not, you can add the squeegee to your order.
    How long does delivery take?
    5-7 days in UK and Ireland. 3-7 days in the rest of Europe depending on country. You'll receive an email with tracking when shipped.
    How long do they really last in the sun?
    Roland Eco-SOL MAX inks last 3 years outdoors without lamination (manufacturer figure). With our added UV varnish the colour stays for several more years, typically 4-5 years with moderate sun exposure. Indoors without direct sun they last virtually indefinitely without losing colour.
    What happens if it rains shortly after applying?
    You need to let the adhesive cure before exposing it to water. We recommend waiting 24-48 hours after application. After that time, it withstands rain without problem. If it rains before, adhesion can be affected at the edges — better avoid wetting it the first hours.
    Do they withstand a car wash tunnel or pressure washing?
    Yes. After 48h of curing, the UV varnish protects against pressure water and conventional car wash soap. That said, avoid directing very strong jets directly at the edges (they can lift over time) and don't use aggressive cleaners like industrial degreasers or solvents.
    Do they come off without leaving marks?
    Yes, under normal conditions. Apply moderate heat with hairdryer at low power, lift a corner and pull slowly. If any adhesive residue remains, clean it with alcohol or mild glass cleaner on a cloth. On cured car paint in good condition they usually come off without visible damage.
    Are they suitable for a motorcycle helmet?
    On relatively flat areas of the helmet, yes. Our vinyl is monomeric calendered, ideal for flat or gently curved surfaces. On helmets with pronounced curves or protrusions it can wrinkle over time — for those areas cast vinyl is recommended. If the helmet area is flat, the sticker holds well with the UV varnish.

    Customer reviews

    4.7/5 · 128 reviews from the category

    No reviews yet for this product. Be the first to share your experience after purchase!

    Guarantee and commitment

    Original Roland Eco-SOL MAX inks
    UV varnish protector applied after printing
    REACH-certified vinyl · GREENGUARD-certified inks
    Up to 4-5 years outdoors with moderate sun
    Made in Spain since 2000
    100% secure payment
    More information about your data
    Based on the purchase contract concluded between the user and Banner Imagen S.L. (Muraldecal.com), the data provided by the user through this form will be incorporated into databases for which Banner Imagen S.L., with VAT number ESB22348015 and headquarters at Polígono Monzú, Ronda Industria, C/Interior Nave 13, 22006 HUESCA (Spain), is fully and exclusively responsible. The purpose of collecting data on this form is to facilitate the processing of orders, user profiling, and the sending of commercial offers by email (2 to 3 monthly shipments) about products and/or services that may be of interest to our customers. Banner Imagen S.L. commits not to make data transfers or international transfers, except in cases of legal obligation. You have the right of access, rectification and deletion, as well as other rights, as indicated in the privacy policy, at the email info@muraldecal.com.