📣️ 10% OFF | STYLE10

Stickers for Kids Panda in the bathtub

5 (1 opinion)
11.24€ 14.99€ -25%
You save 3.75€
· Ref. asdr043
Buy it NOW and receive it on Monday 18 May

Magic for their room, peace of mind for you

Exclusive original designs. Water-based eco-solvent inks, REACH compliant. Washable. Removable without damaging the bedroom paint.

  • Exclusive original designs — no expensive licenses or generic copies
  • Eco-solvent inks and water-based adhesive, no solvents (REACH)
  • Cleans with soft cloth + water + neutral soap, no hard scrubbing
  • Remove without damaging paint when they grow up and change tastes
  • Figures come together but separate easily: you compose the wall
  • Made in Spain: environmental management and regulated working conditions

100% original and exclusive designs — we don't pay licenses or sell generic copies. Each room turns out unique.

Why this decal applies perfectly

Four technical reasons why your install will go right the first time.

Designed for walls, not adapted

High-quality polymeric vinyl developed specifically for walls and surfaces. Won't shrink or warp after installation, even with humidity or temperature changes.

Adhesion improved year after year

Years ago we got complaints about edges peeling. We switched to the current material with better adhesion. Your feedback is what makes us improve.

Original inks and plotters

We print with Roland plotters and original Eco-Solvent inks — no low-cost compatibles. Professionals notice the resolution quality.

Cut with professional precision

Each piece is die-cut on high-end tangential plotters. The contour is exact to the millimeter — no manual trimming required.

Will it work on your wall or surface?

Each material is designed for different surfaces. Find your case in the table. If your surface isn't listed, write to us before ordering.

Surface Result
Smooth interior wall
Textured/stippled wall (any type)
Freshly painted wall (less than 3-4 weeks) !
Smooth wood (door, furniture)
Glossy painted wood !
Glass, window, mirror
Kitchen tiles (on wall)
Daily-use desk/table (Ikea, office) !
High-traffic floor
Car dashboard / interior !
Fabric / porous surface
Shower interior (direct water)
Flat radiator (regular use) !
Outdoor sun exposure
Suitable With conditions Not suitable

Want a desk, floor or dashboard? The UV laminate model is the right choice: it withstands foot traffic, kitchen heat and car washes. If your surface isn't listed or you have doubts, write to us before ordering and we'll help you decide.

Details and exceptions per surface

Textured walls: we don't recommend applying decals directly on stippled or textured walls, even fine texture. If you need to decorate one, install a smooth backing (foam board or thin board) first and apply the decal on top.

Recently painted: wait 3-4 weeks after painting. If you don't, you risk lifting paint when removing the decal.

Glossy painted wood: sand lightly to improve adhesion.

Tiles: grout lines between tiles will show through after installation.

Daily-use desk/table: printed vinyl without laminate wears down with intensive use. For tables, we recommend the UV laminate model.

Floor: non-laminated decals can't withstand foot traffic. Always use the UV laminate model for floors.

Dashboard: works without laminate but degrades faster from sun and chemical cleaners.

Shower: avoid areas with direct, constant water contact.

Radiator: sustained high temperatures weaken the adhesive. If used regularly, the decal will deteriorate faster.

Outdoor (printed): 5-year warranty under sun exposure (3-4 years for metallic finishes).

Surface not listed or have doubts? Email atencionalcliente@teleadhesivo.com (Mon-Fri 7am-3pm CET) and we'll get back to you before you buy.

What's in the box?

Here's exactly what arrives with you, no surprises.

  • The decal itself: ✓ with transfer paper already applied
  • Installation instructions: ✓ product-specific
  • Plastic squeegee: ✓ pre-added to your cart (you can remove it if you already own one)
  • 🎁 Bonus decals: 🎁 yes, always

About the transfer paper

The transfer paper comes already applied to the decal. You don't need to attach it: it arrives in place, keeps the design aligned during installation and peels off easily when you're done.

Squeegee pre-added

The plastic squeegee we recommend for smoothing out bubbles comes pre-added to your cart. If you already have one at home, you can remove it before paying.

🎁 Bonus decals

Small bonus decals in every order — a token of appreciation. You don't need to add anything to the cart: they arrive inside the box.

How to install

Most of our customers install it themselves, even with no prior experience.

Before you start, check that:
  • The surface is clean, dry and free of dust or grease.
  • Room temperature is between 10-25 °C / 50-77 °F (vinyl doesn't adhere well below 10 °C).
  • You haven't painted the wall in the last 3-4 weeks.
  • You have the squeegee handy (included if you didn't remove it from the cart).
Select your decal size
  1. 1 Clean the wall with a damp cloth and let it dry completely.
  2. 2 Position the decal (already comes with transfer paper applied). Mark corners with masking tape if you want to lock the position.
  3. 3 Peel off the backing paper, holding the decal + transfer set together.
  4. 4 Apply in one move from one edge, smoothing with your hand to avoid bubbles.
  5. 5 Run the squeegee from the center outward, pressing firmly.
  6. 6 Peel off the transfer paper slowly, at a low angle (~30°). If a piece lifts, press it back with the squeegee and retry.
  1. 1 Clean the wall and let it dry.
  2. 2 Mark the center of the decal and the wall with a soft pencil or masking tape.
  3. 3 Position the decal aligning the centers. Tape the top edge with masking tape to act as a hinge.
  4. 4 Lift the lower half and remove the lower half of the backing paper. Cut the removed backing so it doesn't get in the way.
  5. 5 Lower the decal slowly, smoothing from the center outward with the squeegee.
  6. 6 Repeat with the upper half: remove the hinge tape, lift up, peel off the remaining backing, lower while smoothing with the squeegee.
  7. 7 Peel off the transfer paper slowly, at a low angle (~30°), starting from a corner.
  8. 8 If bubbles remain, prick them with a fine pin and smooth toward the hole.

If you want more detail, download the PDF above or check our How to install page.

Care, durability and removal

What you need to know to keep it in good shape for years and remove it without damage.

Cleaning and maintenance

Daily cleaning: a dry or lightly damp microfiber cloth is enough to remove dust. For tougher dirt: warm water + neutral soap + soft cloth, no hard scrubbing.

What NOT to use: harsh solvents (acetone, mineral spirits), abrasives (scouring pads, powders), bleach, or ethyl alcohol-based products.

Declared durability

Use condition Your decal
Indoor, no direct sun or humidity Up to 20 years (virtually unlimited)
Indoor with indirect sun Virtually unlimited
Outdoor with moderate sun 5 years warranty (3-4 years for metallic finishes)
Heavy foot traffic (floor) Not suitable — use the UV laminate model
Kitchen heat / use surfaces Suitable on walls, not contact surfaces
Car wash with chemicals Doesn't withstand
Ambient humidity (bathroom, kitchen) Suitable, avoiding continuous water

How to remove the decal

  1. Warm the decal gently with a hairdryer on medium heat (not high), about 15-20 cm / 6-8 inches away.
  2. Pull slowly from a corner, keeping a low angle (~30°) to the wall. If you feel resistance, warm again.
  3. Remove any adhesive residue, if any, with a cloth dampened with isopropyl alcohol.
Recently painted wall (less than 3-4 weeks): risk of lifting paint along with the decal. Wait for the paint to fully cure.

If you run into a tricky removal (paint about to come off, stubborn residue, delicate surface), check our FAQ before using harsh products. Some solvents damage more than they clean.

Frequently asked questions

The ones we get most in the workshop. Question not listed? Email us.

Can I apply it to textured/stippled walls?
We don't recommend it, even for fine texture: adhesion is poor and the result suffers. If you need to decorate a textured wall, install a smooth backing first (foam board or thin board) and apply the decal on top.
How do I remove it without damaging the wall?
Warm the decal gently with a hairdryer on medium heat and pull slowly from a corner at a low angle. Remove any residue with a cloth dampened with isopropyl alcohol.
How do I clean the decal?
Soft cloth dampened with water and neutral soap, no hard scrubbing. DO NOT use solvents, bleach, abrasives or ethyl alcohol.
What's the material warranty?
Indoor: up to 20 years in controlled conditions (no direct sun, no humidity). Outdoor: 5 years (3-4 years for metallic finishes). Plus a 3-year legal warranty on all products.
Do I need special tools?
Just a plastic squeegee, which is pre-added to your cart (you can remove it if you already have one). Instructions are included in every order.
How long does shipping take?
Spain and Portugal: 24-72 working hours. Rest of Western Europe: 3-7 days. USA: 4-7 days. Full table by destination on the Shipping Methods page.
What if my product arrives defective?
3-year warranty + free replacement if it doesn't match the requested measurements, color or finish. 100% free handling. We pick up and replace without you having to lift a finger.
Is the material safe for a baby's room?
We print with eco-solvent inks and water-based adhesive, no solvents (REACH). The material is washable and removes without leaving chemical residue.
Is it washable if my child smudges it?
Yes. Soft cloth + water + neutral soap, no hard scrubbing. Holds up to whatever happens in a kid's room.
Can my child help apply it?
Of course! Deciding where each piece goes is fun as a family. We recommend an adult run the squeegee at the end so no bubbles remain.
Can the figures be separated from the kit?
Yes. Even though they come grouped on a single sheet, you can cut the backing paper with regular scissors to place them where you want.
What if they grow up and want to change the design?
The decal removes without damaging paint (heat + low angle + isopropyl alcohol for residue). The wall is ready for the next design.

Question not listed? Visit our complete FAQ by category: wall decals, kids decals, or wall murals.

Customer reviews

5
★★★★★
Based on 1 verified reviews
Alexander DE 10-04-2018
★★★★★

Super Material

Our commitment to you

Four guarantees we back with facts, not empty promises.

🛡️ 3-year warranty, no handling fees

3-year legal warranty on all products, per European regulations. If your product fails due to a manufacturing defect within that period, we repair, replace or refund it. Handling costs are 100% free for you.

↻ If it doesn't match, free replacement

If your product doesn't match the requested measurements, color or finish, we'll collect it and replace it immediately at no cost, as long as it hasn't been installed. We apply this policy especially to custom-made orders.

👤 Real human support, not automated

A real person answers, not a robot. Email atencionalcliente@teleadhesivo.com. Hours Mon-Fri 7am-3pm CET. We produce every day from 7am.

🌱 Responsible production in Spain

We manufacture in Huesca with environmental and labor responsibility. Waste managed under European regulations — ink and vinyl waste handled in a closed loop. Regulated working conditions — hours, risk prevention and holidays per current regulations.

Is your order taking longer than expected?

Don't wait until the deadline passes. Email atencionalcliente@teleadhesivo.com (Mon-Fri 7am-3pm CET) and we'll check what's happening with the shipment. If there's a delay, we'll tell you before you have to claim it.

At TeleAdhesivo we don't just make decals; we build trust. Every order is prepared in a handcrafted, personal way, backed by a solid warranty and human support that walks you through the process.
More information about your data
Based on the purchase contract concluded between the user and Banner Imagen S.L. (Muraldecal.com), the data provided by the user through this form will be incorporated into databases for which Banner Imagen S.L., with VAT number ESB22348015 and headquarters at Polígono Monzú, Ronda Industria, C/Interior Nave 13, 22006 HUESCA (Spain), is fully and exclusively responsible. The purpose of collecting data on this form is to facilitate the processing of orders, user profiling, and the sending of commercial offers by email (2 to 3 monthly shipments) about products and/or services that may be of interest to our customers. Banner Imagen S.L. commits not to make data transfers or international transfers, except in cases of legal obligation. You have the right of access, rectification and deletion, as well as other rights, as indicated in the privacy policy, at the email info@muraldecal.com.