📣️ 10% OFF | STYLE10

Kitchen Backsplash Adhesive Refreshing Lime

Wall Murals: Refreshing lime
Wall Murals: Refreshing lime

= Wallmural crop zone

Wall Murals: Refreshing lime
Wall Murals: Refreshing lime
Wall Murals: Refreshing lime
Wall Murals: Refreshing lime
Wall Murals: Refreshing lime

Ref. slp027

Price: 52.75€
Size: 350 x 48 cm.
-0% dto.

Kitchen Backsplash Adhesive Refreshing Lime

Measure the width and height of the surface you want to place it on. You can cut the mural wherever you want by moving the corners over the photo.
52.75€
cm
cm

2. Type

Normal
Inverted
Color
B/W

3. Material

Self-adhesive
Canvas Paper
Translucent
Description of materials and installation instructions at the bottom of the page.

-

Today's Price: 52.75€

Buy it NOW and receive it on Tuesday 19 May *

UV-laminated decal: walk on it, wash it, lasts

Same Roland satin-printed material + matte UV laminate layer. Tested in pandemic with thousands of floor products.

  • Matte UV laminate over the print: protects against scratches and sun
  • Tested in pandemic with thousands of floor products manufactured
  • Suitable for floor traffic, kitchen heat, car wash, dashboard sun
  • Roland plotters + original Eco-Solvent inks on polymeric vinyl
  • Applied with a firm squeegee, no transfer paper
  • 3-year warranty + free replacement if it doesn't match

Our UV laminate was developed and intensively tested in 2020, when we manufactured thousands of floor products during the pandemic. What withstands a floor withstands any surface.

Why this decal applies perfectly

Four technical reasons why your install will go right the first time.

Designed for walls, not adapted

High-quality polymeric vinyl developed specifically for walls and surfaces. Won't shrink or warp after installation, even with humidity or temperature changes.

Adhesion improved year after year

Years ago we got complaints about edges peeling. We switched to the current material with better adhesion. Your feedback is what makes us improve.

Original inks and plotters

We print with Roland plotters and original Eco-Solvent inks — no low-cost compatibles. Professionals notice the resolution quality.

Cut with professional precision

Each piece is die-cut on high-end tangential plotters. The contour is exact to the millimeter — no manual trimming required.

Will it work on your wall or surface?

Each material is designed for different surfaces. Find your case in the table. If your surface isn't listed, write to us before ordering.

Surface Result
Smooth interior wall
Textured/stippled wall (any type)
Freshly painted wall (less than 3-4 weeks) !
Smooth wood (door, furniture)
Glossy painted wood !
Glass, window, mirror
Kitchen tiles (on wall)
Daily-use desk/table (Ikea, office)
High-traffic floor
Car dashboard / interior
Fabric / porous surface
Shower interior (direct water)
Flat radiator (regular use) !
Outdoor sun exposure
Suitable With conditions Not suitable
Details and exceptions per surface

Textured walls: we don't recommend applying decals directly on stippled or textured walls, even fine texture. If you need to decorate one, install a smooth backing (foam board or thin board) first and apply the decal on top.

Recently painted: wait 3-4 weeks after painting. If you don't, you risk lifting paint when removing the decal.

Glossy painted wood: sand lightly to improve adhesion.

Tiles: grout lines between tiles will show through after installation.

Shower: avoid areas with direct, constant water contact.

Radiator: sustained high temperatures weaken the adhesive. If used regularly, the decal will deteriorate faster.

Outdoor with UV laminate: superior durability thanks to the protective layer.

Surface not listed or have doubts? Email atencionalcliente@teleadhesivo.com (Mon-Fri 7am-3pm CET) and we'll get back to you before you buy.

What's in the box?

Here's exactly what arrives with you, no surprises.

  • The decal itself: ✓ with matte UV laminate
  • Installation instructions: ✓ generic for UV laminate
  • Plastic squeegee: ✓ pre-added to your cart (you can remove it if you already own one)
  • 🎁 Bonus decals: 🎁 yes, always

Squeegee pre-added

The plastic squeegee we recommend for smoothing out bubbles comes pre-added to your cart. If you already have one at home, you can remove it before paying.

🎁 Bonus decals

Small bonus decals in every order — a token of appreciation. You don't need to add anything to the cart: they arrive inside the box.

How to install

Most of our customers install it themselves, even with no prior experience.

Before you start, check that:
  • The surface is clean, dry and free of dust or grease.
  • Room temperature is between 10-25 °C / 50-77 °F (vinyl doesn't adhere well below 10 °C).
  • You haven't painted the wall in the last 3-4 weeks.
  • You have the squeegee handy (included if you didn't remove it from the cart).
  1. 1 Clean and degrease the surface with a cloth dampened in isopropyl alcohol (table, dashboard, floor). Let it dry completely.
  2. 2 If the surface is cold (e.g. car in winter), warm it gently with a hairdryer on medium heat.
  3. 3 Position the decal and mark one edge with masking tape as reference.
  4. 4 Peel off the backing progressively from one edge, smoothing with the squeegee with firm pressure.
  5. 5 On curves (dashboards, rounded edges): apply gentle heat with the hairdryer and stretch the vinyl gradually to adapt. Don't force.
  6. 6 Run the squeegee a second time over the entire surface, especially edges and curves.
  7. 7 Let it cure 24-48 hours before exposing to intensive use: foot traffic, car wash, kitchen heat.

The UV laminate protects the decal from scratches and chemicals, but it needs to cure properly at first. Wait 24-48 hours before using it, and it will last for years.

If you want more detail, download the PDF above or check our How to install page.

Care, durability and removal

What you need to know to keep it in good shape for years and remove it without damage.

Cleaning and maintenance

Daily cleaning: a dry or lightly damp microfiber cloth is enough to remove dust. For tougher dirt: warm water + neutral soap + soft cloth, no hard scrubbing.

What NOT to use: harsh solvents (acetone, mineral spirits), abrasives (scouring pads, powders), bleach, or ethyl alcohol-based products.
Extra cleaning (UV laminate):
  • Kitchen table: mild household degreaser, damp cloth. No scouring pads.
  • Floor: mop with warm water + neutral soap. Vacuum without rotating brush.
  • Car dashboard: pressure wash and glass cleaners are fine. Avoid silicone-based waxes in excess.

Declared durability

Use condition Your decal
Indoor, no direct sun or humidity Up to 20 years + scratch protection
Indoor with indirect sun Same + laminate protects colors
Outdoor with moderate sun 5+ years — UV laminate adds extra protection
Heavy foot traffic (floor) Suitable — tested in pandemic with thousands of floor products
Kitchen heat / use surfaces Suitable on tables (not direct cooking countertops)
Car wash with chemicals Withstands
Ambient humidity (bathroom, kitchen) Suitable, avoiding continuous water

How to remove the decal

The UV laminate is designed for semi-permanent use. If you need to remove it:
  1. Heat evenly with a hairdryer — needs more heat than non-laminated vinyl to loosen the adhesive.
  2. Pull slowly from a corner at a low angle (~30°). If the piece is large, remove in sections.
  3. Adhesive residue: isopropyl alcohol applied with cloth, letting it dwell 1-2 minutes before scrubbing.
⚠ K is designed not to be removed often. If you're moving house, consider leaving it where it is.

If you run into a tricky removal (paint about to come off, stubborn residue, delicate surface), check our FAQ before using harsh products. Some solvents damage more than they clean.

Frequently asked questions

The ones we get most in the workshop. Question not listed? Email us.

Can I apply it to textured/stippled walls?
We don't recommend it, even for fine texture: adhesion is poor and the result suffers. If you need to decorate a textured wall, install a smooth backing first (foam board or thin board) and apply the decal on top.
How do I remove it without damaging the wall?
Warm the decal gently with a hairdryer on medium heat and pull slowly from a corner at a low angle. Remove any residue with a cloth dampened with isopropyl alcohol.
How do I clean the decal?
Soft cloth dampened with water and neutral soap, no hard scrubbing. DO NOT use solvents, bleach, abrasives or ethyl alcohol.
What's the material warranty?
Indoor: up to 20 years in controlled conditions (no direct sun, no humidity). Outdoor: 5 years (3-4 years for metallic finishes). Plus a 3-year legal warranty on all products.
Do I need special tools?
Just a plastic squeegee, which is pre-added to your cart (you can remove it if you already have one). Instructions are included in every order.
How long does shipping take?
Spain and Portugal: 24-72 working hours. Rest of Western Europe: 3-7 days. USA: 4-7 days. Full table by destination on the Shipping Methods page.
What if my product arrives defective?
3-year warranty + free replacement if it doesn't match the requested measurements, color or finish. 100% free handling. We pick up and replace without you having to lift a finger.
How long does it take to cure before I can use it intensively?
24-48 hours after installation. During curing, avoid stepping on it, getting it wet, or applying direct heat. After that it withstands intensive use.
Does it withstand car wash with chemicals?
Yes. The matte UV laminate withstands typical pressure-wash products and glass cleaners. Avoid silicone-based waxes in excess.
Does it resist kitchen heat if I put it on a table?
Yes, on a dining or auxiliary table. We do NOT recommend it on direct cooking countertops or in contact with hot pans.
Is it non-slip on the floor?
Yes. The matte laminate provides adequate grip for domestic foot traffic. For intensive commercial use, get in touch.
How long does it last on a floor with intensive use?
We developed and tested it in 2020, manufacturing thousands of floor products during the pandemic. It withstands domestic use for years — varies with traffic frequency and cleaning.
Can it be removed in the future?
Yes, with even heat and patience, but it's designed for semi-permanent use. If you're moving house, consider leaving it where it is.

Question not listed? Visit our complete FAQ by category: wall decals, kids decals, or wall murals.

Customer reviews

4
★★★★★
Based on 1 verified reviews
Luisa DE 19-07-2023
★★★★★

Die Folie ist sehr stabil, lässt sich trotzdem super verarbeiten!! Tolle Farben, keine Pixel! 5-Sterne!! Den einen Stern Abzug deshalb: Die Nischenrückwand (ca.3,2m lang) wurde in 2 Teilen geliefert. Das ist technisch evt. ja nicht anders möglich, habe das aber nicht erwartet oder gewusst. Um den genauen Anschluss an das Motiv mit der zweiten Bahn hinzubekommen, mußte ich die 2. Bahn ca.3mm tiefer ansetzten. An der Stelle habe ich keine Hängeschränke, so das das etwas auffällt. Wenn dort Hängeschränke sind, ist das sicher kein Problem

Our commitment to you

Four guarantees we back with facts, not empty promises.

🛡️ 3-year warranty, no handling fees

3-year legal warranty on all products, per European regulations. If your product fails due to a manufacturing defect within that period, we repair, replace or refund it. Handling costs are 100% free for you.

↻ If it doesn't match, free replacement

If your product doesn't match the requested measurements, color or finish, we'll collect it and replace it immediately at no cost, as long as it hasn't been installed. We apply this policy especially to custom-made orders.

👤 Real human support, not automated

A real person answers, not a robot. Email atencionalcliente@teleadhesivo.com. Hours Mon-Fri 7am-3pm CET. We produce every day from 7am.

🌱 Responsible production in Spain

We manufacture in Huesca with environmental and labor responsibility. Waste managed under European regulations — ink and vinyl waste handled in a closed loop. Regulated working conditions — hours, risk prevention and holidays per current regulations.

Is your order taking longer than expected?

Don't wait until the deadline passes. Email atencionalcliente@teleadhesivo.com (Mon-Fri 7am-3pm CET) and we'll check what's happening with the shipment. If there's a delay, we'll tell you before you have to claim it.

At TeleAdhesivo we don't just make decals; we build trust. Every order is prepared in a handcrafted, personal way, backed by a solid warranty and human support that walks you through the process.
More information about your data
Based on the purchase contract concluded between the user and Banner Imagen S.L. (Muraldecal.com), the data provided by the user through this form will be incorporated into databases for which Banner Imagen S.L., with VAT number ESB22348015 and headquarters at Polígono Monzú, Ronda Industria, C/Interior Nave 13, 22006 HUESCA (Spain), is fully and exclusively responsible. The purpose of collecting data on this form is to facilitate the processing of orders, user profiling, and the sending of commercial offers by email (2 to 3 monthly shipments) about products and/or services that may be of interest to our customers. Banner Imagen S.L. commits not to make data transfers or international transfers, except in cases of legal obligation. You have the right of access, rectification and deletion, as well as other rights, as indicated in the privacy policy, at the email info@muraldecal.com.